Recommended SnapPads For 10" Octagon Shaped Equalizer Jack Feet

Question

Question:

What snappads will fit the equalizer jacks on my thor motorhome? They're octagon shaped and about 10" in diameter

asked by: Elizabeth

0

Expert Reply:

For the 10" diameter octagon shaped jack feet on your Equalizer Leveling System I recommend the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet- Qty 4 # SN76FR. These heavy-duty rubber pads snap onto your motorhome's Equalizer leveling jacks to make leveling faster and easier while also eliminating the need to crawl under your motorhome to position plastic pads or wood blocks. Simply place the pads under your jack feet and lower your jacks until they "snap" into place.

The increased surface area of your leveling jack's feet provides added support for your motorhome and prevents sinking into soft ground, unlike smaller metal feet.

I've attached some videos below that will offer some additional information and show you the installation process.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Answer 4

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 5

Hey Dan, The ground for the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 typically gets tied into the ground for the braking system to intertwine them so that they're active at the same time. When used to prevent turn signals from…

view full answer...

Answer 6

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 7

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 8

If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet #SN76FR will work great. If not, you're going to have to measure your jack…

view full answer...

Answer 9

The SnapPad EQ, #SN76FR will fit 10" octagon or concave round jack feet.

view full answer...

Answer 10

The information I can find shows that the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet #SN76FR are the correct pads for your 2017 Jayco Seneca Super C Motorhome. I do recommend verifying that you do have the…

view full answer...

Recommended SnapPads For 10" Octagon Shaped Equalizer Jack Feet

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching