Weight Distribution Shank For 2-1/2 Hitch That Has 14 Inches From Center Hole To Adjustment Hole
Question:
I need more from my shank the curt C17132 would work however I need the center of the pin to be 12 inches or about 16 inches over length like my Reese shank.
asked by: Richard M
Helpful Expert Reply:
The Curt # C17132 is the closest we have to matching those lengths you mention. The distance from pin hole to the adjustment pin hole is 8-1/2" on center.
Depending on how heavy your load is, you could use a hitch reducer like # BWRHXA2182 to convert your 2-1/2" hitch to a 2" hitch and use the WDS shank # C17122. This has a 14" pin hole distance to adjustment pin hole on center, and is rated for up to 15,000-lbs and a maximum tongue weight of 1,500-lbs.
Products Referenced in This Question
B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- B and W
more information >
Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 7 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Weight Distribution System Compatible With Lifted Truck
- Article: Steel vs. Aluminum Ball Mounts
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Why Are There Long Holes on Side of etrailer Magnetic 2-1/2" to 2" Hitch Receiver Reducer Sleeve
- Q&A: Recommended 2-1/2 Shank For Equal-i-zer Weight Distribution Hitch With Around 10 Of Drop
- Q&A: Weight Distribution Shank For 2-1/2 Inch Hitch With Drop For Fastway e2 Weight Distribution Hitch
- Q&A: Recommended Weight Distribution Hitch For 36' 2022 Palomino Puma Pulled By Lifted Ram 2500
- Q&A: Weight Distribution Hitch Shank For 2-1/2 Inch Hitch With at Least 10 Inches of Drop
- Q&A: Can Trailer Weight Capacity Be Increased by Changing One Trailer Axle
- Article: Calculating Portable Generator Power Needs
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Determining Trailer Tongue Weight