What Can Replace My Atwood Weld On Coupler On My Trailmaster Trailer
Question:
Im sure you have been asked this many times... but I have a Trailmaster trailer with a 84133 Attwood coupler that I need to replace. Can you provide an alternate and advice on how to make the swap? Thank you,
asked by: Fred S
Expert Reply:
Your Atwood coupler is welded on to your Trailmaster trailer. Unfortunately, the only way to replace it is to remove it and replace it with a new welded on coupler. The Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs, part # T43397007K, will be your best option. You will have to have a welder install this on your Trailmaster trailer.
I have included a product description link and a video review link below.
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement for Atwood Surge Brake Actuator 82541
- Q&A: Replacement Surge Brake Actuator For Atwood 85736 That Is Discontinued
- Q&A: Surge Brake Actuator Recommendation to Replace Fulton A60 on Trailer
- Q&A: Best Replacement for Atwood 82543 Brake Actuator
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)