How Does an EZ-Lube Axle Work
Question:
how does the greese get to the inner brg the boring seems to end at the cotter pin and the gesse comes out there to greese the outer brg. I just ordered buddy brgs to see if the greese will get to the inner brg
asked by: Al L
0
Expert Reply:
On an EZ-Lube axle, the grease gets inserted at the end of the spindle through a zerk fitting and comes out of a hole that should be in between the bearings, filling them both. You would not be able to use Bearing Buddies because the zerk fitting at the end of an EZ Lube axle would interfere with the installation.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Plugs
- TruRyde
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Search Results: leaf springs
- Q&A: How to Grease a Dexter EZ Lube Axle
- Q&A: Replacement Leaf Spring for 7,000 Pound Lippert Axle
- Q&A: Should I Use 10 or 12 Inch Brakes on a Trailer with 3,500 Pound Axles and 16 Inch Rims
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Q&A: Are Trailer Hub/Drums Directional Like Trailer Drum Brakes
- Search Results: rv leaf spring replacement
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Can Trailer Brake Assemblies be Mounted Upside Down
- Search Results: leaf spring replacement system
- Shop: HydroMax RV Fresh Water Pump - 12 Volt - 3 Gallons Per Minute - 55 psi
- Search Results: lippert 4400 lb axle
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: houston
- Search Results: 3.75 wheel center cap
- Search Results: rv water pump
- Video: Dexter Trailer Idler Axle w/ EZ Lube Hubs Installation
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: Review of TruRyde Trailer Spindles - Replacement EZ Lube Spindle - TRU27FR
- Video: Performance Tool Tools - Vehicle Tools - PTW41021 Review
- Video: Review of Dexter Trailer Brakes - Electric Drum Brakes - K23-478-479
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased Trailer Idler Hub Assembly - 84545UC1-EZ
- Video: Kodiak Trailer Hubs and Drums - Hub - KH84545S Review