Recommended Blue Ox Base Plate Kit For A 2021 Jeep Cherokee Trailhawk

Question:

I have an alpha 2 tow bar and need some blue ox base plates for my 2021 Jeep Cherokee Trailhawk. Are there any that fit that would work with this tow bar?

asked by: Dave H

Expert Reply:

Yes, you'll need the Blue Ox Base Plate Kit - Removable Arms # BX1143. These custom fit base plates will bolt to the frame of your Trailhawk and have tabs that are compatible with your Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,500lbs # BX7380. They have removable arms that can be taken out when not towing for a clean look and to save your shins when walking around the vehicle.

To flat tow your 2021 Jeep Cherokee Trailhawk you'll also need a tow bar wiring kit, braking system, and possibly a high/low adapter. I have the following recommendations for you below:

Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit allows you to use your Jeep Cherokee's tail lights and wiring system while preventing feedback from your RV and includes everything you'll need.

Note: If your vehicle has ParkSense proximity sensors then you will need the Roadmaster Wiring Kit with Smart Diodes for Variable Voltage LED Tail Lights # RM47ZR and Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit # RM-146-7 instead.

Braking System: Brake Buddy Select 3 Portable Supplemental Braking System - Proportional # HM39524. This system offers intense, emergency braking or steady, smooth braking in a single portable system. Easily switch between proportional or full braking using the remote from the cab of your motorhome. This braking system also includes a charge line kit to keep your vehicle's battery charged while you tow.

As for the high/low adapter, you'll need to ensure that your tow bar stays within the 3" range from level. This will require you to do some measuring so I've attached our help guide article that walks you through the steps of determining the correct rise/drop needed.