Tools Needed To Install Trailer Hitch Receiver and Wiring Harness On a 2019 Hyundai Tucson
Question:
Just want to double check that I dont need any other parts to install a hitch on a 2019 Tucson. The hitch and electrical package contain everything needed? Thank you
asked by: Philip N
Helpful Expert Reply:
For your 2019 Hyundai Tucson the Draw-Tite Max-Frame Trailer Hitch Receiver # 75836 includes the receiver, 7 mounting bolts and 7 washers needed to install the receiver on your Tucson. You will need the following tools to install this receiver. A 16mm socket, ratchet wrench, torque wrench capable of at least 42ft-lbs torque and a flat head screw driver. Safety glasses are recommended to protect your eyes from any foreign objects that may drop off the frame.
The Tekonsha T-One Vehicle Wiring Harness # 118812 will provide you with all the wiring needed to install a properly functioning 4-way flat connector on your Tucson. The tools needed for this installation are a trim panel remover, 10mm socket and ratchet or 10mm wrench, drill (3/32” drill bit), fish tape, test-probe and a utility knife.
The Curt Easy Mount Bracket # C58002 will provide you a secure place to mount the end of the 4-way connector. This helps to ensure that it is easy to access and does not drag on the ground.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 1-1/4" Hitch
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Lock Cores for Thule Rapid Podium Feet
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Towing Setup for 2018 Hyundai Tucson
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II Trailer Hitch and Class III Trailer Hitch
- Q&A: Availability of Hitch for 2018 Hyundai Elantra Sport GT Hatchback
- Q&A: Installed Clearance Dimension for Curt Trailer Hitch C11400 on 2016 Hyundai Elantra GT Hatchback
- Article: My Trailer Hitch Doesn't Fit
- Article: Troubleshooting Brake Controller Installations
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?