Trailer Wiring Harness for 2021 Jeep Grand Cherokee Without Tow Package
Question:
I need a trailer wiring harness for my 2021 Jeep Grand Cherokee. It doesn't have the tow package. What parts do I need?
asked by: Alvin
Expert Reply:
For a 4 pole trailer wiring harness, you'll want to go with part # 118727.
If you needed a 7-way trailer connector, you'd start by installing the # 118727 to access the lighting circuits. How you'd proceed from there will depend on the trailer you're wanting to tow. If the trailer doesn't have brakes, and your future plans don't involve towing a trailer that has brakes, you can simply use the # 37185 4-pole to 7-way adapter.
If the trailer has brakes, you'll want to install a brake controller to actuate them. I'd recommend the Redarc Tow-Pro Liberty, part # RED24FR. You'll also need the # RED69FR wiring pigtail. The controller mounts under the dash so it's out of sight, and so you won't whack your knee on it. The braking is adjusted by using the control knob that is mounted within easy reach of the driver. If you have any unused switch knockouts on the dash or center console, that would be the perfect spot. If you don't have a knockout available, a mounting bezel like part # 331-TPSI-001 would make for a tidy, professional looking installation.
To install the controller, use our # ETBC7 Brake Controller Installation Kit, which includes all the wire, hardware and circuit breakers needed to complete the installation. The # 37185 adapter mentioned above is also included.
I've linked to some installation instructions and videos that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Accessories and Parts
- Trailer Brake Controller
- Control Knob Mounting Panel
- Universal
- Redarc
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 2 Axles
- Indicator Lights
- Redarc
more information >
Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Redarc
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Where to Find VIN/Serial Number on Boat Trailer
- Article: How to Use a Roof Rack (Like a Boss)
- Q&A: Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
- Q&A: Replacement for Atwood 70254 RV Landing Gear Switch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: My Trailer Hitch Doesn't Fit
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Article: How to Measure Your Trailer Wheel Bolt Pattern