Recommended Trailer Wiring Harness For A 2021 Jeep Grand Cherokee
Question:
I need a trailer connector for my trailers lights. I have a 2021 Jeep grand Cherokee. What do you recommend?
asked by: Suzanne
Expert Reply:
For your 2021 Jeep Grand Cherokee I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118727 if you do not have the factory tow package. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the tail lights on both the driver's side and passenger's side. You will need to remove the tail lights to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket like # 18144 is recommended to keep the connector secure.
If you already have the factory tow package and just need to add a 7-way connection you can simply install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774. This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side. Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure.
I've attached videos below that will walk you through these easy peasy installations.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- CURT
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Q&A: How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Article: Trailer Maintenance Schedule
- Article: Flat Towing Package for 2014-2018 Jeep Grand Cherokee
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Troubleshooting 4 and 5-Way Wiring Installations