Can Curt Friction Sway Control # 17200 Install on Passenger Side of Trailer
Question:
2019 coachman pursuit 18,000 GVWR I will be towing a 20 foot trailer 8000 lbs GTW . I am looking for the sway control. Issue mounting purposes wanting the sway control to be on the passenger side of the trailer. Battery is on drivers side.
asked by: Jim
0
Expert Reply:
You can mount the Curt friction sway control unit part # 17200 on the passenger side of your trailer. You'd just need to remove the insert from the housing, rotate it 180 degrees and then reinsert it and you'd be set.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Trailer Break Control Installation for Tekonsha Prodigy P3 on 2019 Mercedes-Benz Sprinter 3500
- Q&A: Where is the Trailer Brake Controller Plug on a 2020 Mercedes-Benz Metris
- Q&A: Flexco Double Step Width Dimensions
- Q&A: How To Mount Weight Distribution Hitch On 2021 Intech Flyer Discover W/ Completely Covered A-Frame
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does the Weight of the B&W Continuum Weight Distribution System Get Added to the Tongue Weight?
- Q&A: Replacement for Dexter 8-283 Hub/Drum
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight