Replacement Bearings for 2013 Adjustable EZ Loader 23 Foot Boat Trailer
Question:
I have an EZ Loader trailer vin# 1ZE1JAP14DB019244 what bearing kit do I need to order?
asked by: Alan H
Expert Reply:
I reached out to EZ Loader and although they were unable to completely identify your trailer, even with the VIN, I was able to narrow down what you need to 2 possibilities. In order to figure out which of these is right for you, you're going to need to check out your spindle.
If you have a straight spindle, the correct inner and outer bearing is the # L44649 which uses race # L44610. The grease seal is the 12194TC but you can use the # 34823 instead.
If you have a tapered spindle, you need a # L44649 outer bearing and # L68149 inner bearing which uses race # L68111. The # 168255TB grease seal would be the correct seal.
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels