Height of Timbren Rear Suspension Enhancement System T94VR For 2015 Ram 3500 Cab & Chassis

Question:

I am wanting to know if this will address sagging. I need to know the actual height of the item. I have about 6 and 1/25 where this would mount on to the top. Just need the actual height of the item T94VR

asked by: Mark

Expert Reply:

I checked with Timbren, and these come with a 1 inch spacer, so with the spacer, the height of the kit Timbren Rear Suspension Enhancement System # T94VR is 7-1/4 inches; without the spacer it measures 6-1/4 inches. You mentioned having 6 inches, and I'm not sure if you meant 6.25, but the # T94VR do require at least 1/2 inch of space under them so they would seem to be too big for your 2015 Ram 3500 cab and chassis.

Another option to consider that will help with sag is from SuperSprings:

- SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA23

The SuperSprings # SSA23 install above your current leaf springs, and are adjustable so you can get them to the desired support. How they work is that when you have a load in your bed or are towing, these springs will activate to support the back of your truck, allowing your leaf springs to work normally. They will help level you out as well as stabilize your ride to reduce sway.

I have added a link below to a video review for you to check out as well of the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA23.