Troubleshooting Wobble Roller Rollers Not Rolling
Question:
My father has a 2016 Shore Lander boat trailer for his 2016 16’ aluminum fishing boat. The issue is the rollers that came on the trailer are sticky and barely roll. This creates a problem for my aging Dad to get the boat on and off the trailer. My thought was to replace the rollers with something that rolls better. The problem is I don’t know which rollers roll better. I am hoping your team can help me figure out a way to get his boat rolling again!
asked by: Todd
Expert Reply:
In order to get your wobble rollers rolling again I have two recommendations. The first is to attempt to pull them off and clean them, then use grease to free up the movement. Another possibility is that the shaft is bent. You should be able to bend it back if you find this to be true. If this does not solve the problem you will want to replace them.
In order to find a replacement roller you will need to know the diameter of the shaft to make sure it fits. I would also recommend measuring the wobble roller you have now to find a similar size. The CE Smith Ribbed Wobble Rollers # CE29210 fits a 3/4" and 1-1/8" roller shaft. The roller has a 5" diameter and is 3" wide. The ribbed design provides additional traction which is great for slick or slimy hulls.
What you have now looks a lot like the Yates Wobble Roller # YR440R which fits a 3/4" shaft and has a 4-1/4" diameter and is 4-1/4" wide.
I have attached a link for all of our available wobble rollers that you can filter down by shaft diameter and size.
Products Referenced in This Question
Yates Wobble Roller - Heavy-Duty Rubber - 4-1/4" Diameter - 3/4" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 4-1/4 Inch Wide
- 4-1/4 Inch Diameter
- Black Rubber
- Fits 3/4 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
CE Smith Ribbed Wobble Rollers for Boat Trailers - Rubber - 3/4" and 1-1/8" Shafts - Qty 4
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Black Rubber
- Fits 3/4 Inch Shaft
- Fits 1-1/8 Inch Shaft
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Ribbed Wobble Rollers for Boat Trailers - Rubber - 3/4" and 1-1/8" Shafts - Qty 4
- Shop: Yates Wobble Roller - Heavy-Duty Rubber - 4-1/4" Diameter - 3/4" Shaft
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR440R Review
- Shop: CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1
- Search Results: wobble roller
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 3/4" Shaft
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE29210 Review
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR530R-6P Review
- Shop: BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps - 2" x 4' - 833 lbs - Qty 2
- Search Results: boat tie down straps
- Search Results: bow rollers
- Search Results: compass
- Shop: LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness
- Video: Review of Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR343R-6P
- Video: Yates Boat Trailers Bow Roller Review
- Video: Review of TecNiq Boat Lights - Strip Lights - TN38ZR
- Video: TecNiq Premium Slim LED Strip Light Review TN24ZR
- Q&A: Bearing Bushing Length of Yates Wobble Roller # YR530R-6P
- Q&A: What Holds Wobble Rollers onto a Trailer
- Search Results: rollers for loadrite trailer
- Search Results: keel roller
- Search Results: ce smith bracket
- Q&A: Troubleshooting Trailer Lighting Where Only One Running Light Works
- Q&A: No Running Lights On Trailer with Two Brown Wires Wishbone Trailer Wiring Harness
- Shop: Base Plate for Tow Bar
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Locating Replacement Wobble Rollers for 23 Foot Load Rite Trailer
- Q&A: Replacement Guide On or Roller for Yarborough Boat Trailer