Will Replacement Hub and Drum Assembly for Dexter 008-219-04 Fit Dexter Axle 8327834
Question:
I want to get 2 Item # 8327834, but I am going to be buying a set of drums with electric breaks with these specifications. Hub and Drum Specifications and Features: Bolt Pattern: 8 on 6.5 x 1/2-20 Studs Pre-Installed Bearing Races Pre-Installed Replaces OEM# 008-219-04 Bearings Include: 25580 inner cone bearing and 14125A outer cone bearings. Grease seal 2.25 x3.371 EZ lube grease cap and 8 cone wheel nuts, 1/2-20 thread. Will these work with this axle?
asked by: Cleveland W
Expert Reply:
The Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327834 will work with the hub and drum assembly you have described. This axle uses a # 25580 inner bearing and # 14125A outer bearing. The grease seal inner diameter should be 2.25" so that matches as well. It has a 7,000 lb capacity and a 5 bolt brake flange configuration.
I have attached a review and installation video for your reference.
Products Referenced in This Question
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 7000 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Video: Review of Lippert Camper Jacks - Replacement Hydraulic Jack Assembly - LC63ED
- Search Results: trailer wheels center caps
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Video: Review of Lippert Replacement Lead Leg Hydraulic Jack Assembly Level Up - LC83ED
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Aluminum Liger Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Glossy Black
- Q&A: Troubleshooting a Lippert Level-Best Leveling System that Suddenly Stopped Working
- Shop: Trailer Wheel Center Cap Plug - Black
- Shop: Lionshead Trailer Wheel Center Cap - 4.88" to 4.9" Pilot - Stainless Steel - Qty 1
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Search Results: 23~180
- Search Results: marker lights
- Search Results: liger
- Search Results: 23~464
- Search Results: butyl
- Search Results: wheel
- Video: Review of Americana - Tires and Wheels,Boat Trailer Wheels - AM90081
- Video: Review of Dexter Axle Trailer Brakes - 12 inch Brake Assembly - 23-180
- Video: Full Disc Brake Conversion Installation - 2020 Jayco Pinnacle Fifth Wheel
- Q&A: Correct Hub/Drum and Brake Kit for #42 E-Z Lube Spindle w/ Flange
- Q&A: Replacement Studs for a Trailer Hub and Drum Assembly # 42866UC3-EZ
- Q&A: Determining if Lionshead Snap-In Plug # LHSI60C Will Fit Unknown Brand Center Cap
- Video: Lionshead Trailer Wheel Center Cap Review
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Q&A: New Grease Seal Leaked After Installation of Bearing Buddies with Hub Kit # 8-248-50UC1
- Q&A: Grease Seal and Grease Recommendation for Dexter 7k Axle
- Q&A: How to Know When to Replace Trailer Brake Hub Drums