Options For A Shank With More Drop For The Curt C17501 TruTrack Weight Distribution System
Question:
Just purchased a Curt C17501 weight distributing hitch from you. My tow vehicle is a 2001 Ford F350 4 wheel drive dually. Your listed hitch specifications show a maximum rise of 5-1/2 inches and a maximum of 1/2 inch. My 4 wheel drive F350 sits somewhat higher than a 2 wheel drive pickup so I may need more than 1/2 inch . Is the 1/2 inch specification a typo/error? Can I get 6 inches of by rotating the shank in the receiver 180 degrees? My trailer is a Featherlite 4926 22 foot bumper pull car hauler which is on order. Thank you.
asked by: Richard
Expert Reply:
The shank that comes included with the Curt TruTrack Weight Distribution System # C17501 does indeed only offer 1/2" of drop. Though it will depend on how much drop is needed, and you do have 1-1/2" up and down to still technically be level, we do have a couple other shanks that will offer more drop.
The Curt # 17120 will offer 5-3/4" drop and the # C17123 will offer 8-1/4" of drop. These will cover most vehicles and are both rated to 1,500 pounds of tongue weight and 15,000 pounds towing, but if you need more, let me know and I can shoot you over a couple other options.
Products Referenced in This Question
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 9 Inch Rise
- CURT
more information >
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Why is There Wide Tongue Weight Range for Curt Weight Distribution System part # C17501
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Correct Curt TruTrack Weight Distribution System for 10,000 Lb Trailer
- Q&A: Does Weight Distribution Lower Tongue Weight on Hitch of Tow Vehicle
- Q&A: Eliminating Trailer Bounce When Towing And Using Weight Distribution System
- Q&A: Will Curt TruTrack Weight Distribution C17501 Work on a Trailer with 7,294 Pound Dry Weight
- Q&A: Weight Distribution System Compatible With Lifted Truck
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500