How to Determine Correct Electric Brakes For 3,500 lb Axle
Question:
I’m looking to replace my trailer brakes that aren’t working right. I have 15 inch wheels and a 3500 lb axle and found a tag that says model T35. Is this enough to find all the parts I will need? Thanks
asked by: George
Expert Reply:
We can get you the correct replacement brakes for your 3,500 lb axle, but just to be sure you are getting the right fit, there are a couple of things you will want to verify. First is the size of your drum, which when you measure it needs to be 10 inches in diameter and the inside should be at least 2-1/4 inches wide, which is highly likely since you have a 3,500 lb axle.
Next you want to check your brake mounting flange, and it should have bolt holes that are 2-7/8 inches apart, like Brake Mounting Flange # 4-35, which I added a photo of below with the dimensions. If you have the right drums size and flange, then we do have electric brake assemblies for you:
- Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469
The Dexter # 23-468-469 are self-adjusting, which is really convenient because you won't have to constantly re-adjust the brakes by hand, and they even come with the mounting hardware so you don't have to make any other purchases.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: 86-1/2 Inch Long Axle Option For Grand Design Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Do I Need Brakes On Both Axles of a Car Hauler Trailer?
- Q&A: Recommended Wet Bolt and 2-1/4" Shackle Strap Kit for Tandem Axle Trailer
- Q&A: Leaf Spring Recommendation for 4,400 lb Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs