Is The Eqal-i-zer WD Shank 90-02-4200 Interchangeable With Equal-i-zer WD Shank 90-02-4400

Question:

Is the 4200 model interchangeable with the 4400 model shank? i have the 4400 level, but at the top adjusting holes, and have IMO too much adjustment tube below unused, and want to alleviate that by going to a 4300 or 4200 model. It appears at the top adjusting holes for trunnion WDH setup on the 4400 the is roughly 4. could i use the 4200 on lowest point and achieve the 4inch or do i need to go with the 4300 model to achieve my aprox 4inch top of shank to base of 2 5/16 ball. like i said the whole concern is the unused excess hanging down. 2015 ram big horn 1500, stock/oem, 8spd, 3.42 ?, 5.7 hemi, air lift 1000hd bags @ 30psi when loaded.

asked by: George G

Expert Reply:

Yes, you can use any of the holes on the Equal-i-zer Weight Dist Shank # EQ90-02-4200 and it is also interchangeable with the Equal-i-zer Weight Dist Shank # EQ90-02-4400. As long as your trailer is still as level as possible, then you won't have any problems.

expert reply by: Bryce D