Go Power Battery Monitor Kit Differences gp-bmk-50 and gb-bmk-25

Question

Question:

What is the difference between the Go Power gp-bmk-50 and the gb-bmk-25?

asked by: Mark K

0

Expert Reply:

The difference between those two part numbers is the length of the cable that each kit comes with. The part # GP44FR or the GB-BMK-25 comes with a 25 foot cable and the other part number a 50 foot cable.

expert reply by: Jameson C

0

Answer 1

According to Go Power, their #GP44FR RV Battery Monitor Kit is indeed compatible with Lithium batteries. I've linked to a product description video for the monitor kit.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 6

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 7

Hey Don; good question and no other parts - including any type of adapter plate or mounting plate - is needed to mount the 30 Amp Go Power PWM Solar Charge Controller with Bluetooth #GP76QR. The #GP76QR comes with screws and is ready to be mounted…

view full answer...

Answer 8

It sounds like you already have the Bluetooth Remote Display for Go Power MPPT Solar Charge Controllers #GP37MR with the Go Power MPPT Solar Charge Controller #GP72RR. The Remote Display for Go Power MPPT #GP37MR actually uses a bluetooth app as…

view full answer...

Go Power Battery Monitor Kit Differences gp-bmk-50 and gb-bmk-25

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching