How To Verify The Bearings On a 2017 EZ Loader Boat Trailer
Question:
Wheel bearings for 1987 Ezloader boat trailer vin#1ZE1LEZ26HA041264
asked by: Terry C
Expert Reply:
To verify the bearings on your 2017 EZ Loader 1987, you should be able to contact EZ Loader. All they will need is your VIN and they should be able to tell you exactly what you need. From everything I could find, there were 3 or 4 different hub options that could have been used. If they cannot tell you what was used, there are a few ways verify them.
There are typically numbers/letters engraved on the bearings and races. However, these do wear out over time and can be hard to read or find. If this is the case, you can also measure the inside diameter of the bearings. These can be pretty exact, so I recommend using a pair of calipers if you need to go this way.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels