Comparing Trailer Hitch Receiver Clearances on 2022 Kia Telluride
Question:
Can you tell me what trailer hitch receiver has the better clearance from the ground on a 2022 Kia Telluride the etrailer or the curt?
asked by: Walter E
Expert Reply:
Like you mentioned, there are two trailer hitches that fit your 2022 Kia Telluride, the Curt # C13420 and the etrailer # e95ZR, and between the two, the hitch with the best ground clearance as well as the best bumper clearance is the option from Curt:
- Curt Trailer Hitch Receiver # C13420
The Curt hitch will have a clearance from the ground to the top of the receiver of approximately 16 inches, while the same measurement for the etrailer will be approximately 15-1/2 inches. So there's not much of a height difference with the Curt hitch.
The only other thing I wanted to mention, in case you were going to use either hitch for towing, as that if you want to add a trailer wiring harness to your '22 Telluride, the correct fit is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- etrailer
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Replacement Automotive Lighting
- Q&A: Replacement Trailer Wheel for Dexstar Wheel 17-293
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Q&A: Wiring Instructions For The Furrion Automatic Transfer Switch
- Q&A: Can RV Covers Be Left On Travel Trailer While Driving
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop