How To Wire A 7-Pole, RV Blade-Style Trailer Socket For Powering Accessory
Question:
I have a 12v DC fuel transfer pump we use to fill our tractor with diesel. Its currently wired to a 7 blade trailer plug for power. Id like to add a female connector to the tractor so we dont have to bring the truck over to fill it. How should I wire that up?
asked by: Pate M
Helpful Expert Reply:
What I think you are saying is that you have a 7 blade trailer plug on your truck that has a battery hot lead connected and you power a 12VDC transfer pump with this connection. What you are wanting to do, is to add the same to the tractor so you have option to power that pump from this vehicle as well. My suggestion is to use the Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End, # PK12-707E or, the metal housing option of, # PK12703. To wire, please note the linked product review video for a visual and the attached help article. The black lead should be the hot lead and the white for ground. I suggest using at least a 12 gauge wire. If your purpose is only to supply a power port for your transfer pump the remaining terminals are not needed as they are all for indicator lights and reverse lights.
Products Referenced in This Question
Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Product Page this Question was Asked From
Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Converting a Semi 7-Way Trailer Connector to an RV 7-Way Trailer Connector
- Q&A: Replacement Hub And Bearing Kit For An AL-KO 8460 Hub
- Q&A: How to Tell if 2020 Toyota Highlander XLE Has Factory Tow Wiring
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: How To Know If Your Tiffin Motorhome Has A Towed Air Brake Setup Or BrakeSync
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design
- Q&A: Semi Trailer Light Function Locations on Heavy Duty 7-Way Pin Connection
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)