Trailer Hitch and Trailer Wiring for a 2011 Acura TSX 4-Door Sedan
Question:
I went through a local place to try to get a hitch setup on my 2011 Acura TSX Sedan 4 cylinder but for some reason it didnt fit. Im guessing theres a difference between 2009/2010 model and 2011 and after. I just want to confirm before I order this part that it definitely fits my car and other guys with a 2011 TSX have successfully installed the hitch before. Thanks.
asked by: Henry W
Expert Reply:
The Curt trailer hitch # C11496 is a fit for the 2011 Acura TSX, TL, and Honda Accord. I have included a link to the installation instructions and a link to a video showing a typical isntallation of the hitch.
If you are planning on doing some towing the correct ball mount is # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118420. I have included a link to a video and a link to the instructions for the wiring as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Can 2010 Honda Accord be Jacked Up with Draw Tite Hitch Installed
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Comparing Curt Trailer Hitch # C11085 and # 11496 for a 2008 Honda Accord
- Q&A: Recommended Receiver Hitch to Carry 2 Bike Rack on 2010 Acura TL
- Q&A: Visibility of Hitch After Mounted on a 2009 Honda Accord 4 Door
- Q&A: Difference Between 2 Curt Trailer Hitch Receivers that Fit the 2009 Honda Accord
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: Best Bike Racks for Recumbent Bikes (2023)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Hitch Adapters and Extenders
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: What Do I Need To Tow A Trailer?
- Article: Basics of Cargo Nets and Tarps