Quieter Weight Distribution Hitch With Sway Control For a Shasta 25RS Travel Trailer
Question:
I have a 2018 Ram 1500 Hemi. My camping trailer is a Shasta 25rs. GVWR-6750, hitch weight of 690. I need a weight distribution hitch. I was looking at the Reese Steadi-Flex RP 66559 or 66560. Would they be a good choice? I would like backing ability and reasonably quiet. Any help you could give me would be appreciated
asked by: Charles R
Expert Reply:
Yes, the Reese Steadi-Flex Weight Distribution System 10,000LB # RP66559 and 12,000LB # RP66560 are both good hitches. These both fit within your tongue weight and overall camper weight. You can backup with these hitches installed as well, so you can select whichever you wish but remember if you decide to upgrade your camper you may prefer the 12,000LB option. They do provide a slightly quieter ride as they do use the friction material as opposed to direct steel on steel friction.
You will need a 2-5/16" Hitch Ball # C40030 to install onto the hitch.
The Replacement Friction Pad Kit # RP58527 should be carried with you incase you run into issues while traveling. These are designed to wear over time and should be inspected every time you prepare to use the hitch.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 15000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Replacement Friction Pad Kit for Reese Steadi-Flex Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Friction Pad
- Reese
more information >
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Lightest Weight Wheel Tire Combo w/ a ST235/75R15 Tire
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Where to Mount Spring Bar Support Brackets on Curt TruTrack Weight Distribution System # C17499
- Q&A: Weight Distribution Hitch Towing A 1978 Seacamper Houseboat
- Q&A: Recommended Weight Distribution System for 7,800 Pound Tritoon Boat Trailer
- Q&A: Which System Is Best Between The Curt TruTrack & The Equal-i-zer Weight Distribution System?
- Q&A: Quieter Weight Distribution System Recommendation for Trailer w Unloaded Tongue Weight of 490 lbs
- Q&A: Will Curt Hitch Ball # A-6 Work on Reese Steadi-Flex Weight Distribution System RP66559
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch