Determining If We Have A Replacement For A Dayton Fayette 9254 Hub and Drum Assembly
Question:
I have an old school mobile home/ utility trailer. Im looking for the hub/drum and its bearing kit. To do have it?
asked by: Anibal P
Helpful Expert Reply:
We may have a replacement hub for your Dayton Fayette 9254, but the only way to be sure is by determining which bearing combination and grease seal your spindle uses.
You will need to remove one of the hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If the bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindles in the locations shown in the included diagram, but either way you will need to measure the spindle to determine the correct grease seal.
If you can provide this information I would be happy to make a recommendation for you.
![Samuel C](https://images.etrailer.com/static/images/catg/people/2240_tn.jpg)
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Continue Researching
- Search Results: 145 tires and wheels
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Q&A: Replacement Seal for Dayton Trailer Hubs with L68149 Inner Bearing
- Q&A: Hub and Drum Assembly with Inner Bearing 1.75 ID and Outer Bearing 1.25 ID
- Search Results: trailer brake kits
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: Grease Seals 10-36 (pair)
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-201-5UC3 Review
- Video: Redline Trailer Brakes 4-44-1 Review
- Search Results: apubr~10
- Video: Redline Round Trailer Axle U-Bolt Mounting Kit Review
- Search Results: wheels
- Video: Dexter Left and Right Electric Trailer Brake Kit Installation
- Q&A: How To Ground Trailer Tail Lights Without a Ground Wire To a Wooden Surface
- Video: Gen-Y Hitch Aluminum Loading Ramps Review
- Q&A: Replacement 12" Brakes for Fayette Dayton 9254 W-5 Axle
- Video: Bright Way Push-to-Test Trailer Breakaway Kit Review and Installation 3802308
- Video: Bright Way Trailer Breakaway Kit with Switch Review
- Q&A: Locating Replacement L68145 and 144549 Bearings for Trailer
- Q&A: Adding Brakes to a Mobile Home Axle
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Search Results: axle castle nuts
- Search Results: dust cap
- Shop: Suspension Enhancement