What O.D. Pipe Mount Does The Pro Series Round Pipe Mount Swivel Jack Fit On?
Question:
I am replacing a worn out tube-mounted jack stand on a trailer. It is mounted and under load right now but it seems to me that the tube welded to the trailer is 2 1/2inch O/D. Could you check that your specified answer to one of the questions is that your standard mount is for a welded tube of 2inch o/d, as opposed to pipe diameter, which is often the bore dimension.
asked by: John D
Expert Reply:
The Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 15" Lift - 5,000 lbs # PS1401440303 you were looking at gets mounted to the included pipe mount, or an existing pipe mount that has an outside diameter of 2".
You will want to remove your current jack and verify what pipe mount diameter you have before placing an order for this jack, or worst case you can have the included pipe mount welded to the frame of your trailer if your current mount is a different size.
I included a video of the # PS1401440303 for you to take a look at.
Product Page this Question was Asked From
Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 15" Lift - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Sidewind Jack
- Swivel Jack
- 15 Inch Lift
- Pipe Mount
- Weld-On
- With Rectangle Foot
- Pro Series
more information >
Continue Researching
- Q&A: Will the Pro Series Swivel Trailer Jack, # PS1401440303, Fit a 7 Inch Trailer Frame
- Shop: Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 15" Lift - 5,000 lbs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Amount of Play on Dexter 12K Torflex Axle Under Max Load
- Q&A: Winch Repair Kit for Dutton-Lainson Trailer Winch Model DL1602A
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Charging Auxiliary Battery from Car Cigarette Lighter or 12 Volt Auxiliary Plug Connector
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement For Fulton Drop-Leg Stabilizer Jack
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Rooftop Cargo Carriers
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Calculating Portable Generator Power Needs
- Article: How to Choose the Right Trailer Hitch Class