Thread Size For Cleaning Weld Nuts To Install Draw-Tite Receiver on a 2013 Chevrolet Equinox
Question:
The bolts we received with the hitch do not fit, there is no rust in the holes. What is the proper size nut?
asked by: Kristal
0
Expert Reply:
You will have received 2 different size bolts with the Draw-Tite Trailer Hitch Receiver # 36408 for your 2013 Chevrolet Equinox.
There are six M12-1.25 thread pitch bolts that you will need to mount your Receiver. The 1/2"-13 bolts and nuts are for a Saturn Vue that does not have the weld nuts in the bumper.
expert reply by:
Bud M
0
![Bud M](https://images.etrailer.com/static/images/catg/people/2449_tn.jpg)
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability of Replacement Control Module for 694654
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How To Test for Bad Controller on Lippert Ground Control 3.0 Electric Leveling System
- Q&A: How Much PSI Should I Put In a 4.80 x 12 Trailer Tire
- Article: How Much Trailer Can I Really Tow
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Frequently Asked Questions About Transmission Coolers