Dimensions of Furrion Replacement Door for FSRE17SASS RV Stove/Oven

Question

Question:

Can you give me the dimensions of the Furrion FR52FR replacement oven door? I have a 2019 Heartland Bighorn 5th wheel RV. 3160EL model. Thank you!

asked by: Jim T

0

Expert Reply:

I'd be happy to provide those for you. The # FR52FR replacement oven door measures 21-7/8 x 11-3/4 x 3-5/8 inches thick (including the handle).

I've shown these dimensions on a photo for you.

expert reply by: Mike L

0

Dimensions of Replacement Door for Furrion FSRE17SASS RV Range/Oven
(click to enlarge)

Answer 1

We were able to get the dimensions for you of the replacement door you asked about: - Replacement Glass Oven Door for Furrion 2-in-1 Range Oven - Black #715326. This door measures 21-3/8” wide x 11-3/4” tall by 1-1/4” thick. I have added a cut out…

view full answer...

Answer 2

The correct replacement oven door for your Furrion oven is going to depend on which model of Furrion oven that you have. If you have the model 405222ET, 2 in 1 oven then you will want the Replacement Oven Door #FR79ZR. If you have the F1S21L02A-BL,…

view full answer...

Answer 3

The Replacement Glass Oven Door for Furrion 2-in-1 Range Oven #715326 for the Furrion 2-in-1 Range Oven with Glass Cover FSRE17SABL, which is no longer available is actually slightly different than the: -Replacement Stainless Steel Oven Door for…

view full answer...

Answer 4

We do not have a direct replacement for your Magic Chef MCFR21STS or MCFR21TTB as we do not carry Magic Chef parts, however the Furrion #FR66NR has really close dimensions and should work fine as a replacement.

view full answer...

Answer 5

Yes the stainless #FR52FR is the same as the black part #715326 so they are interchangeable.

view full answer...

Answer 6

In order to find the model number on the Furrion 2-in-1 Range Oven part #FSRE21SABL you will need to pull this out away from the cabinets and then look on the left hand side of the unit for a white sticker with barcode which should then display the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Dimensions of Furrion Replacement Door for FSRE17SASS RV Stove/Oven

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching