Replacement Leaf Springs for 2012 Dutchman Voltage 3905
Question:
Need a part number for leaf spring packs on a 2012 voltage 3905
asked by: Tyler H
Expert Reply:
In order to find the correct leaf springs for your 2012 Dutchman Voltage 3905 you will need to take some measurements and know the capacity of your axle.
What you are looking for is the center of spring eye to center of spring eye measurement. In order to get the most accurate measurement ,the wheels of the trailer should be off the ground since the springs stretch when weight is applied.
I have attached an image showing where you need to measure. If you provide me with this information I would be happy to recommend the correct replacement leaf spring.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
- Q&A: What is the Torque Spec of the Spindle Nut on a Dexter E-Z Lube Axle
- Q&A: What is the Difference Between Double Eye Leaf Springs and Slipper Leaf Springs
- Video: Review of Redline Trailer Leaf Spring Suspension - Spring Mounting Hardware - AP216-H238
- Q&A: Does a Tandem Axle Trailer Need Equalizers
- Q&A: How to Pick Out New Hubs for a Construction Trailer
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: trss300
- Search Results: slip spring
- Search Results: slipper springs
- Search Results: akebrk~7~sa
- Search Results: rm~2460~2570
- Search Results: 42866uc3
- Search Results: sp~232275
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Video: Electric Over Hydraulic Disc Brake Installation
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-384-00 Review
- Video: etrailer Electric Left and Right Hand Assemblies Trailer Brake Kit Installation - 5th Wheel
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 42866UC3 Review
- Video: Review of Kodiak Trailer Brakes - Disc Brakes - K2R35DKG
- Q&A: What Voltage and Amperage Should Trailer Brake Magnets Have
- Q&A: Replacement Hub Recommendation for a Dexter 8-155 Hub
- Article: How to Replace Trailer Leaf Springs in 5 Steps