Will Easy Grease Hub and Drum AKHD-655-35-EZ-K Fit A 2016 Lippert 3500lb Axle?
Question:
Will this drum fit a 2016 Lippert 3500lb axle SN: 057-000301539?
asked by: Gerald
Helpful Expert Reply:
Yes, since the Easy Grease Trailer Hub and Drum # AKHD-655-35-EZ-K you were looking at uses the standard bearing combination used by 3500lb axles which is # L68149 inner bearing and # L44649 outer bearing, this hub will fit your 2016 Lippert 3500lb Axle perfectly.
With that said this hub has the less common 6 on 5-1/2" bolt pattern. If that is what your current hub has this would be correct, but the majority of 3500lb axles use the 5 on 4-1/2" bolt pattern. You can verify this by using the included help article to measure your wheels.
If you find you need the 5 on 4-1/2" bolt pattern we have the # 84546UC3 instead.
If you are needing new brakes to go along with the hub you will need the Electric Trailer Brake Kit # AKEBRK-35-SA.
I included videos of the products mentioned for you to take a look at.
(click to enlarge)
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Tire Sizing
- Q&A: Black Slide Topper For 188 Inch, 159 Inch, and 74 Inch Flange to Flange Measurements
- Q&A: Upgrading Toyota Tacoma from 4-way Flat to 7-way Round Trailer Connector
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Q&A: Best Speed Rating for a 4.80-12 Trailer Tire
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Q&A: Replacement Trailer Brake Assembly for B12EA-22 on 2018 Forest River 294BH Travel Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rooftop Cargo Carriers
- Article: Where to Position the Trailer Axle?
- Article: Determining Trailer Tongue Weight
- Article: Most Popular Wheel Bearings