Difference in Head Tilt Adjustment for Curt TruTrack and Washer Tilt Adjustment Used By Equal-i-zer
Question:
one of them has 2 pins and the other has one pin and a hole. is this correct?
asked by: JAMES T
Expert Reply:
I'm assuming that you're speaking of the head tilt mechanism of the # C17500 Curt TruTrack weight distribution system. Many other systems like the Equal-i-zer # EQ37100ET use traditional spacer washers that fit onto a pin in the weight distribution head unit, the more washers installed, the greater the tilt.
The # C17500 TruTrack uses spacers that can lock into the hitch head in one of 5 positions to adjust the angle of the hitch head as shown in the provided diagram.
Although I'm a huge proponent of the Equal-i-zer product, the TruTrack tilt adjustment is easier to use in my opinion.
I've linked to videos showing the TruTrack and the Equal-i-zer systems being set up.
(click to enlarge)
Products Referenced in This Question
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Why is it Important to Make Weight Distribution Head Angle Adjustment
- Q&A: What are the Sizes and Torque Ratings for the Bolts in Curt TruTrack Weight Distribution Systems
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Replacement 7-Way for Trailer Wiring
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Which Mirror Monitor Will Work With The Rear View Safety Backup Camera System # RVS-770613-213?
- Q&A: What Style of 7-Way Plug Does the Electric Jack w/ Footplate and 7-Way Plug Use
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)