Replacement Wheel Straps For Yakima Standard Bike Cradles

Question

Question:

I am wondering if these straps would work as a Replacement Wheel Strap for the Yakima SprocketRocket or HighRoller.Y8880077

asked by: Steve M

0

Expert Reply:

The Replacement Wheel Strap for Yakima SprocketRocket or HighRoller Roof Mounted Bike Carrier # Y8880077 is the only strap confirmed to fit the Yakima SprocketRocket or HighRoller bike racks. The Replacement ZipStrip Straps for Yakima Standard Bike Rack Cradles - Qty 2 # Y8890297 that you were looking at is not a confirmed fit for the Yakima SprocketRocket or HighRoller so I cannot say for sure if it would work or not, although they look similar.

If you have a bike rack other than the SprocketRocket or HighRoller then let me know which model you have and I will track down the correct straps for you.

expert reply by: Andrew N

0

Answer 1

The Replacement ZipStrip Straps for Yakima Standard Bike Rack Cradles #Y8890297 have a width measurement of roughly 20mm and a thickness of roughly 3 mm. The #Y8890297 were used on Yakima bike racks manufactured before December 2015.

view full answer...

Answer 2

I attached a picture that shows the T-slot dimensions that the Inno T-slot Adapter Kit #INBRP12 is designed to fit. We've found that most roof rack manufacturers make the dimensions of their top channels to be close enough that they allow…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Wheel Straps For Yakima Standard Bike Cradles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching