Recommended Disc Brake Kit for 2020 Grand Design Reflection 5th Wheel 311BHS
Question:
What disc brake conversion kit would you recommend for a 2020 Grand Design Reflection 5th Wheel 311BHS?
asked by: Derek W
Expert Reply:
In order to recommend a disc brake kit for your trailer, some additional information will be needed to make sure it fits the spindles.
The first thing you will need to know is which inner and outer bearings you currently have. You may be able to find the numbers stamped on your existing bearings. If they are worn off, you will need to measure where the bearings ride using a digital caliper like # PTW80157. I have attached a picture showing where you will need to measure and where the part numbers are typically found.
The other piece of information you need is the bolt pattern. The HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers # HSE7K-T1 you looked at has a 8 on 6-1/2 bolt pattern. It also uses inner bearing # 25580 and outer bearing # 14125A.
If you find that your bearings match the bearings this kit uses and you need an 8 on 6-1/2 bolt pattern, then this kit would be a great choice. If this does not fit what you have I would be happy to provide a recommendation if you can provide me with the bearing numbers or measurements.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Wiring Diagrams
- Q&A: Is There Slip On Style Hydrastar Disc Brake Kit for 7k Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement AC Unit for a Dometic B57915.711C0
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: When Will The Furrion Chill Cube RV Air Conditioner Be Aftermarket Available
- Q&A: Is There Kit to Convert 7k Axle from Grease to Oil Bath
- Q&A: Solution for Needing Replacement Lens for Trailer Taillight SAE-APC-86
- Q&A: Will HydraStar Electric Over Hydraulic Actuator Work With 2016 Ford F-250 Factory Brake Controller.
- Q&A: Comparing HydraStar Disc Brake Kits with Actuator for Tandem Axle Trailers - 7K
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide