Can the ARC 1156 LED Bulb Be Used in an Interior Dome Light on my Vehicle

Question

Question:

Hi, Do you recommend the ARC45FR for use in an interior plastic dime light or will this get much hotter than a standard bulb and potentially melt the housing. Thank you

asked by: John

1

Helpful Expert Reply:

Yes, you can use the 1156 LED Bulbs - 360 Degree - Single Contact Bayonet - 1,000 Lumens # ARC28FR as an interior dome light and it will not put out any more heat than a standard incandescent light bulb. This is designed for in-vehicle use.

expert reply by: Erik B

1

Answer 1

I attached a picture that shows what the mounting brackets of the RV Ladder part #SP501L look like. These are what attach to the roof of your RV.

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…

view full answer...

Answer 4

To get more height from your 2019 Grand Design Reflection you will need to use trailer jack blocks like #SC88VR, I did also speak to Stromberg Carlson to confirm this information. You could alternatively use a different jack to achieve more height.…

view full answer...

Answer 5

The Stromberg Carlson #SC88VR Base Pad Extreme has a 6000 lb capacity. Since your travel trailer weighs 6500 lbs, the trailer's tongue weight would be 10-15% ore that, which would be between 650 and 975 lbs which is well under the 6500 lb…

view full answer...

Answer 6

I attached a diagram that shows how most 7-way rounds like the #PK11720 that you referenced will get wired up. As long as you got yours wired up correctly and your trailer taillights and brakes are functioning correctly that's all that should…

view full answer...

Answer 7

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

view full answer...

Answer 8

While unlikely, it is certainly possible that the trailer battery could backfeed to your vehicle's battery when hooked up under the scenario you described. To make sure this doesn't happen all you need to do is add a single diode like the…

view full answer...

Answer 9

The correct way to fix this would be to install a battery charger like #20011 on each of your break-away systems. This is a reasonably priced option that will prevent the overcharging of your breakaway battery and will also prevent the back feeding…

view full answer...

Answer 10

If you are planning on using an E-track wheel strap like the part #EM58523 (which would be your best and easiest option for securing the vehicle), you would want to space the E-track sections the exact same width as the tires on your vehicle. Right…

view full answer...

Can the ARC 1156 LED Bulb Be Used in an Interior Dome Light on my Vehicle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching