How to Mount Sway Control Ball on Right Side of Ball Mount Used in Rise Position
Question:
I will need to mount this item upside down in my receiver to make the ball higher off the ground. However, this will put the bracket on the left side when facing the truck from the camper. I need the bracket on the right side however to use with your 83660 sway control bar. Suggestions?
asked by: Rhett J
Expert Reply:
I do have a solution for you. Simply use a ball mount with the same rise, like part # C45010 along with a sway control tab, part # RP26003. The tab is placed on top of the ball mount once it is situated in the rise position, and is installed so that it is sandwiched between the trailer ball and the ball mount.
We do not carry a ball mount that would have the tab on the right side when used in the rise position.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Product Page this Question was Asked From
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Shop: Brake Controller
- Shop: Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Video: Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2011 Honda Odyssey
- Video: Curt RockerBall Shock Absorbing Hitch Ball Review C40047
- Article: Trailer Hitch Balls
- Q&A: Does Ball of Curt Rockerball Arrive Installed and Torqued Down
- Q&A: Curt Shock Absorbing Towing Kit w/ Sway Control and without Wireless Brake Controller
- Shop: Replacement Ball for Curt Friction Sway Control System
- Search Results: curt sway control
- Search Results: sway control ball mounts
- Shop: Trailer Wiring
- Search Results: ball mount
- Search Results: curt ball mount only
- Search Results: curt rockerball
- Search Results: convert a ball
- Search Results: locking hitch pin
- Video: Curt Hollow Shank Accessories Anti-Rattle Kit Review
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
- Shop: Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab - 7.5K
- Shop: 2" Hitch Ball - w/ 1" Rise - 1-1/4" Diameter x 2-1/2" Long Shank - Zinc - 6K
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop -14,000 lbs
- Q&A: Does Trailer Hitch Ball And Sway Control Ball Need To Be Level
- Shop: Towing Mirrors
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Video: Review of Curt Wiring Accessories - 7-Way Connector Plug Bracket - C67UR
- Video: Curt Wiring - Wiring Adapters - C57102 Review
- Video: Tow Ready Wiring 18140 Review
- Q&A: Recommended Anti-Rattle Device For a 2" Receiver For Trailer Towing
- Q&A: Length of Curt Sway Control Ball Mount part # D320