How To Prevent Tailgate From Hitting Jack On a Trailer While Lowered
Question:
Can you lower a pickup tailgate without the tailgate hitting the top of Jack?
asked by: John M
Expert Reply:
In most cases, the tailgate will hit the jack on an a-frame trailer when lowered but there are many variables to this that are different for each truck or trailer. If you use an extended length ball mount like the Curt Ball Mount for 2" Hitches part # D-28 or an extended length weight distribution shank if using a extended length weight distribution system like the Equal-i-zer Weight Dist Shank part # EQ90-02-4500, then you should be able to lower the tailgate without hitting the jack but you'll want to measure first to be sure. This will be the same for pretty much any a-frame trailer jack.
If you need a different ball mount please just let me know your rise/drop requirements.
Products Referenced in This Question
Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Continue Researching
- Search Results: curt tru track
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Towing Mirrors
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt MV Weight Distribution System - Round Bar - 8,000 lbs GTW, 800 lbs TW
- Q&A: Recommended Extended Shank Weight Distribution System for Reese
- Q&A: Furrion Vision S Observation System Work with 2021 GMC Sierra 2500 AT4
- Search Results: fr87pr
- Search Results: furrion
- Search Results: shank extension
- Shop: Suspension Enhancement
- Video: Curt TruTrack Weight Distribution Installation - 2014 Chevrolet Silverado 1500
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Search Results: trailer sumo springs
- Search Results: lippert axle parts
- Shop: Lippert Smart Jack Electric Trailer Jack w/ Footplate - A-Frame - 22-1/2" Lift - 3.5K - Black
- Search Results: 18 inch shank
- Shop: 7-Way Vehicle Power Adapter for Furrion RV Observation Camera
- Q&A: What Is the Micron Rating of the AquaFresh Exterior RV Water Filter Kit
- Q&A: Does the Galeo Pro GPS Tracking Device Require a Service Plan?
- Video: K-Source Snap and Zap Driver and Passenger Towing Mirror Review
- Video: Ultra-Fab Electric A-Frame Jack Review uf38-944014
- Q&A: Manual To Electric Conversion Kit for Atwood Jacks On A 2000 Lance In-Bed Camper
- Q&A: Slip On Tow Mirrors that Fit 2019 Chevy Silverado 1500 New Body Style
- Q&A: Tow Mirrors that Fit 2023 GMC Sierra 1500 with Camera Built Into Mirror Housing
- Video: Fulton XLT Powered Drive Trailer Jack Review
- Video: Lippert Smart Jack Electric Trailer Jack Review
- Shop: Trailer Wiring
- Video: Review of Pacer Performance Vehicle Light Parts - Third Brake Light Logic Module - PP20-702