What Kind of Hardware Should I Use For My Trailer D-Ring Tie Downs?
Question:
i dont see an screw in bolts to these d rings. do you have to buy these bolts separately? what suggestions can you give me that i can use for the d rings? they should be heavy duty bolts, right? i am hanging a sound barrier panel over my back door that is approximately 48 lbs. and has 5 grommets at the top. in order for me to move it myself when i need to, i want to add heavy duty unlocking cargo control carbiners to the d ring bolts so i can move the panel across the floor to connect to the other d rings and carbiners to hang it on so i will have access outside the back door.
asked by: Gloria R
Helpful Expert Reply:
The Trailer D-Ring Tie Down item # LRB1, will accept bolts no larger than 7/16 inches in diameter so you could go with a 3/8 inch bolt/nut or screw. For your application you can use standard hardware from your local hardware store. I recommend using the same material the D rings are made out of, which is zinc-plated steel, this will keep the d-rings from oxidizing.
Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 4000 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Continue Researching
- Shop: 2-1/4" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Video: Review of Redline Tie Down Anchors - Torx Head Floor Screws - TF01225
- Video: etrailer Trailer Jack JF-1005H-Z Review
- Video: etrailer and Ram Jacks Drop Leg Review
- Shop: Trailer Hitch
- Shop: LED Trailer License Plate Light - Submersible - 2 Diodes - Round - Clear Lens - Male Plugs
- Shop: Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc
- Shop: 2-1/4" Long Torx; Floor Screws, 40/Pkg
- Shop: Peterson Great White LED License Plate Light - 4 Diodes - Chrome Housing - Round - Clear Lens
- Shop: Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
- Search Results: draw bar
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Search Results: weld on d rings
- Search Results: stake pocket tie down
- Search Results: tongue box
- Search Results: mounting bracket
- Search Results: fender mounting bracket
- Video: CargoSmart Quarter Inch D-Ring Tie-Down Anchor Review 348825
- Search Results: 40 amp circuit breaker
- Q&A: Where do I Install D-Ring Tie Downs on a 6x10 Wood Bed Utility Trailer
- Shop: Base Plate for Tow Bar
- Video: Rear View Safety Inc Backup Cameras and Alarms - Backup Camera Systems - RVS-770619N Review
- Article: Basics of Tie-Down Anchors
- Q&A: What Size Bolts Should be Used to Mount the Trailer D-Ring Tie Down, # LRB1
- Q&A: Recessed D Ring Recommendation for Securing 4k Vehicle to Enclosed Car Hauler
- Q&A: Will The InfiniteRule Lock for Demco eZ-Latch # IR56FR Fit Both 2 and 2-5/16 Couplers?
- Q&A: What is the Diameter of the Fastener Holes on the Brophy D-Ring Light Duty Tie Down
- Video: Review of InfiniteRule Trailer Coupler Locks - Stainless Steel Latch Lock - IR66FR