Can Bauer Rotary Latch Fit Door Cutout Dimension of 6-7/8 Tall and 4-3/8 inch Wide

Question

Question:

The opening for our rv door lock is 6 7/8” tall by 4 3/8” wide. Would this lock fit our door??

asked by: Cathy V

0

Expert Reply:

Your cut out is a little bigger than the required cutout for the Bauer Products Rotary Latch part # BA85FR but it will work.

expert reply by: Jameson C

0

Answer 1

We do not carry the Trimark brand of locks and I had a hard time finding information on the model of lock you provided. I looked through the locks that we carry and I do not see anything that fits your 5x5 cut-out opening perfectly. The closest we…

view full answer...

Answer 2

I recommend the Bauer Products Motorhome Door Lock, #BA64FR. This is listed as a replacement for the Trimark 060-0650 and fits doors that are 1-1/4" to 1-1/2" thick with a required cutout of 5-1/4" wide x 4-1/2" tall. For proper…

view full answer...

Answer 3

The Bauer Products Camper Door Lock - Black Item #BA65FR will fit your 2010 Casita Travel Trailer as long as the cutout hole from your previous door lock measures 5-1/4" wide x 4-1/2" tall and you door is 1-1/4" to 1-1/2" thick.…

view full answer...

Answer 4

The Bauer Products Motorhome Door Lock, #BA64FR fits doors that are 1-1/4" to 1-1/2" thick and requires a cutout dimension of 5-1/4" wide x 4-1/2" tall. Based on the measurements you provided and the attached images, yes, I think…

view full answer...

Answer 5

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 6

Yes the Bauer RV door latch part #BA64FR that you referenced would fit as a replacement for your 2005 Jayco Greyhawk Class C RV. This is the same style of latch that you have now.

view full answer...

Answer 7

Without a picture, I can only speculate on what type of lock you have on your Featherlite horse trailer. My lock recommendation would be the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black, part #295-000019. This lock fits…

view full answer...

Answer 8

I spoke with the manufacturer and the Bauer Products Motorhome Door Lock - Black #BA64FR strike plate mounting holes has a 5-1/2" measurement from center to center.

view full answer...

Answer 9

The Bauer Products Motorhome Door Lock, #BA64FR fits doors that are 1-1/4" to 1-1/2" thick and requires a cutout dimensions of at least 5-1/4" wide x 4-1/2" tall. This in no way requires a close tolerance fitment to function, so…

view full answer...

Answer 10

If the hole in your door for the handle measure 2-3/4" x 3-3/4" the #L4080 would work, but most likely you would need a handle like the part #L1883 as that is more like the latching style of your current handle. This latch installs in the…

view full answer...

Answer 11

Hello Doug. The Bauer Products Motorhome Door Lock #BA64FR is definitely going to be your best bet for replacing the latch on your horse trailer door. This latch is made to fit a 5-1/4" wide x 4-1/2" tall cutout. With your hole being only…

view full answer...

Answer 12

Thank you for the pictures of the door latch on your Exiss horse trailer. Based on that the correct replacement is the Bauer #BA64FR that you referenced.

view full answer...