What Seals Will be the Correct Replacements for an H-1000 Hub?
Question:
I have a home made tandem trailer, all the axle seals are throwing grease, the hub has H-1000 stamped on it, the seal OD is 2 9/16foot Dia and 1 3/4 foot Dia ID, the thickness of the seal is 1/2 , cant tell if its double lip but Im guessing double lip has better seal abilities , Ill need 4.
asked by: Robert P
Expert Reply:
From what I could find, you have a Reliableā¢ Brand, H-1000 Series hub. This hub uses a SL-172 seal, which cross references to our # 58846 seal. This double lip seal will have an inner diameter of 1.719 inches and an outer diameter of 2.565 inches. This is also for 3,500 pound axles.
We also have the # 58846 as a 2 pack. This will be the # RG06-050 and two sets will get you back up and running.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.688 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Continue Researching
- Shop: Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Bars
- Shop: Roof Rack
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars
- Shop: Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Thick - 54" Long
- Shop: Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Thick - 65" Long
- Shop: Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 5,000 or 7,000 lbs
- Search Results: truck cap
- Search Results: truck cap rack
- Search Results: 57338
- Q&A: Replacement Bearing Kit for Reliable Brand H-1000 Series Hub
- Search Results: carabiner clips
- Search Results: hub seal
- Search Results: axletek
- Q&A: Ranger Trailer Cool Hub Replacement Grease Seal AD2527E
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Video: Buyers Products Adjustable Trailer Coupler - Coupler with Bracket - 3370091555 Review
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Timbren Trailer Axles - Rubber Spring Suspension - TASR5200S03 Review
- Search Results: una 212
- Video: CargoSmart X-Track Rail Road Test
- Video: Curt Weight Distribution - WD With Sway Control - C17422 Review
- Q&A: Determining The Correct Replacement Hub For Hammerblow H-1000
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Video: Redline Unitized Oil Seal for Trailer Hubs Installation
- Q&A: Changing from Oil Baths to Bearing Buddies on an EZ Loader Boat Trailer
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Q&A: Which etrailer Trailer Hub with 5 on 4-1/2 inch Bolt Pattern Fits 1-1/16 inch Diameter Spindle
- Shop: Nerf Bars - Running Boards