Do Leaf Spring Bump Pads Get Removed Installing Roadmaster Rear Anti-Sway Bar RM25FR

Question

Question:

In step one of the instructions it states to remove the leaf spring bump pads. The pictures of the install show the bump pads still in place and nowhere near the plate instillation. Can you clarify this step one instructions?

asked by: John R

0

Expert Reply:

That's a good question, so I reached out to Roadmaster concerning the bump stop removal for the Roadmaster Rear Anti-Sway Bar # RM25FR.

What their tech team said was that the bump stops will indeed get removed, and are not going to get re-installed.

expert reply by: Kyle S

0

Answer 1

Yes, the Roadmaster Rear Anti-Sway Bar item #RM25FR is confirmed to fit your 2023 Chevy Silverado 3500. This will minimize lateral movement in your rear end and improve stability. You will really notice this installed when you are going over uneven…

view full answer...

Answer 2

I took a look at the instructions (which I also linked for you below), and while there is no drilling into your truck's frame needed, depending on one factor, there may be some drilling required to install the Roadmaster anti-sway bar on your…

view full answer...

Answer 3

I contacted Tech Support at Roadmaster to verify fitment, they confirmed that the Roadmaster Rear Anti-Sway Bar, #RM25FR, 1109-101, is the correct item for your 2021 GMC Sierra 2500HD. They also confirmed that proper installation does use a…

view full answer...

Answer 4

When it comes to installing The Roadmaster Rear Anti-Sway Bar #RM25FR and The Air Lift LoadLifter Helper Springs #AL57541 on your 2023 Chevrolet Silverado 3500, It actually can be installed almost at the same time. First I would start by installing…

view full answer...

Answer 5

The Roadmaster Rear Anti-Sway Bar Item #RM25FR is not a custom fit for your 2021 GMC Sierra 2500 and will require you to drill holes into the frame during install. The bolt you should be using to attach the brackets to the frame are the M12 x 1.75 x…

view full answer...

Answer 6

The Roadmaster Rear Anti-Sway Bar #RM25FR will fit perfectly fine on your 2022 Chevrolet Silverado 2500. The instructions do call for drilling but only if your shock mounts are equipped with weld nuts. If this is the case then you need to drill out…

view full answer...

Answer 7

Yes the Roadmaster Sway Bar part #RM25FR is a confirmed fit for your 2021 GMC Sierra 3500 and is perfectly compatible with air bag kits. The Firestone air bag kits are the best built so when it's time to pick that out I would recommend the part…

view full answer...

Answer 8

The brackets for your camper mounts will not be in the way at all when installing the Roadmaster Rear Anti-Sway Bar Item #RM25FR in your 2021 GMC Sierra 2500.

view full answer...

Answer 9

Yes, we do have exactly what you're looking for, for your 2022 Chevrolet Silverado 3500. The Roadmaster Rear Anti-Sway Bar #RM25FR is confirmed to fit your vehicle, and also includes heavy-gauge mounting hardware, easy-to-follow instructions and…

view full answer...

Answer 10

For your 2021 Chevrolet Silverado 2500HD you will need one of the following kits depending on your truck bed length. 6-3/4 Foot Bed TorkLift Talon Custom Frame-Mounted Camper Tie-Downs Front #TL43QR and Rear #TL44XR 8 Foot Bed TorkLift Talon Custom…

view full answer...

Answer 11

The Roadmaster Rear Anti-Sway Bar Item #RM25FR is a confirmed fit for all 2021 GMC Sierra 2500 models.

view full answer...

Answer 12

The Roadmaster Rear Anti-Sway Bar #RM25FR is confirmed to fit your 2021 Chevrolet Silverado 3500. The kit is designed to work with all models of your Silverado with or without the dual rear wheels. This will also work with air bags like the Firestone…

view full answer...