Determining Correct Electric Brake Assemblies For 2016 Lakota 40' Gooseneck Trailer
Question:
Previous owner removed the electric brakes, looking to reinstall new. Do I need 12inx2in ?
asked by: Brandon F
Expert Reply:
I would be happy to help you find the correct electric brake assemblies for your 2016 Lakota 40' Gooseneck Trailer, but unfortunately we do not have a brake down of the specific components your trailer uses.
What you will need to do is look on the axle tag on the center of your axle and find the axle rating.
Next you will need to remove one of your hub and drum assemblies and measure the inside diameter, and depth of the hub as shown in the included diagram.
If the previous owner removed the drums and installed idler hubs then you will need to find the bearing combination your spindle has. To do this you will need to look for the bearing numbers on both the inner and outer bearings with the hub removed as shown in the included picture of the # L44649.
If the bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.
If you can provide the above information I would be happy to help you find the correct braking assemblies.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: How Long Can You Boondock in an RV?
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Article: Trailer Tire Sizing
- Q&A: Adding Brakes to a Mobile Home Axle
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Article: Gooseneck Trailer Hitch Information and Review
- Article: What To Look For When Buying Ratchet Straps
- Article: Most Popular Wheel Bearings