Fender Dimensions for 235/80R16 Tires with 68” Fenders
Question:
Hi Want to upgrade my trailer with 7000# axles. Want to see of I can use 235/80R16 tires with 68” fenders. Want to see if I will have enough clearance and no rubbing issues. Thanks!
asked by: Xavier
Expert Reply:
The Kenda 235/80R16 tires item # AM10248 that you were looking at, have a diameter of 30.8", a section width of 9.3", and a wheel diameter of 16".
Our only 68" long tandem axle fenders are 9" Wide x 68" long x 17" tall so you would not have enough clearance for that size of tire.
If you want to use that size of tire then I recommend item # HP84VR this is a 72" long tandem axle fender that is 10-3/4" Wide x 72" long x 20-1/2" tall that will have plenty of clearance for a set of 235/80R16 tires.
Products Referenced in This Question
Tandem Axle Trailer Fenders for Enclosed Trailers - Steel - 15" to 16" Wheels - Qty 2
- Trailer Fenders
- No Step
- 15 Inch Wheels
- 16 Inch Wheels
- 10-3/4 Inch Wide
- 72 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Tandem-Axle Trailers
- etrailer
more information >
Product Page this Question was Asked From
Karrier ST235/80R16 Radial Trailer Tire - Load Range E
- Trailer Tires and Wheels
- Tire Only
- Radial Tire
- Load Range E
- 235/80-16
- 16 Inch
- M - 81 mph
- Kenda
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Can Red and Blue Pin Stripes be Removed from a Trailer Wheel
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How To Remove Pin To Install the Paneloc Heavy Duty Spring Latch
- Q&A: Comparing Trailer King RST To Kenda Loadstar ST Tires
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Is There a 3-D Drawing of Ram Gooseneck Coupler Load Bearing Pin - 8" Adjustment - Square - 2-5/16
- Q&A: Will Going to a Higher Load Range Tire Prevent Blowouts on a 5th Wheel Trailer
- Q&A: What are the Dimensions of Trailer Jack Support Plate # BD003135
- Article: How to Replace or Install an RV Roof Vent
- Article: How to Raise Your Travel Trailer Height