Determining Correct Bearing Kit For 2017 Forest River R-Pod 176 Travel Trailer
Question:
Can you tell me the bearing replacement kit I will need for this trailer? Thanks
asked by: Mario C
Expert Reply:
I would be happy to help you find the correct bearing kit for your 2017 Forest River R-pod 176 Travel Trailer, but unfortunately we do not have a break down of the specific components your trailer uses.
Instead what you will need to do is remove one of your current hubs and look for the bearing number stamped in the face of both the inner and outer bearings as shown in the included picture of the # L44649.
If the bearing numbers are worn to the point that you cannot read them you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.
If you can provide your bearing numbers, or spindle measurements I would be happy to confirm the correct replacement bearing kit for you.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer