Best Way To Remove Rear End Sag On a 2015 Ford Expedition EL XLT When Towing a Travel Trailer
Question:
Does this product fit? It says unconfirmed for the truck. Or is there another option for my vehicle. I am trying to lift the back end when towing a travel trailer.
asked by: Derrik B
Expert Reply:
The best product for leveling your 2015 Ford Expedition EL XLT when towing a travel trailer is with a Equal-i-zer Weight Distribution System # EQ37100ET. This will allow you to level your Expedition with the weight distribution and will also give you trailer sway control to make driving safer and less work. This particular hitch system is rated for trailers that have a tongue weight of 600-1,000lbs and a maximum total weight of up to 10,000lbs. An included adjustable shank will allow you to level your trailer when connected to your Expedition.
A 1-7/8" 12pt Thin Walled Socket # ALL643216 is required to install the included 2-5/16" ball that comes with the Equal-i-zer system. I recommend using the Sway Bracket Jackets # EQ95-01-5150 to reduce the hitch noise as well as extend the life of the parts. These nylon jackets sit between the trailer bracket and weight distribution bars to reduce metal on metal contact.
The rear springs on the back of your Expedition will vary and the only way to confirm if a product like the Air Lift 1000 Air Helper Springs # AL61792 will fit is to measure your particular springs. You will need to send me the width, height, coil diameter and spacing of your particular springs. With this information I can make a proper recommendation for fitment.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Brackets
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Air Lift 1000 Air Helper Springs for Coil Springs - Rear
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Air Springs
- Light Duty
- Air Lift
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Q&A: Suspension Enhancement Products for Travel Trailer
- Q&A: How to Prevent Rear End Sag on a 2015 Ford Expedition
- Q&A: Will MB Sturgis Propane Adapter Hose 100476-48-MBS Work with Coleman Propane Stove
- Q&A: Correct Propane Hose for Quick Disconnect on Trailer to Outside Stove Top
- Q&A: Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents
- Q&A: Replacement Circuit Board For MaxxFan Roof Vents w/ Exhaust Only Fan
- Article: Best Air Bag Suspension (2023)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Stability Control for Heavy Duty Vehicles
- Article: Performance Chips and Modules
- Article: Determining Trailer Tongue Weight