Which Idler Hub For Kodiak Slip On Disc Brake Kit With 10" Rotors and 5 Lug Bolt Pattern
Question:
Hi I purchased Kodiak 225 caliper and rotor kit for boat trailer. Did not realize my customers trailer hub and rotors are 1 piece. Can I purchase just the hubs seperate? They are 10inch rotors 5 lug. Thank You
asked by: Jim I
Expert Reply:
Since your customers boat trailer has 10" single piece rotors currently on it that tells me that they have a 3500lb axle and that you ordered the Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2R35D.
For a compatible idler hub to work with this two piece rotor kit you will want to go with the Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel # Q-HUB84545 which has the 5 on 4-1/2" bolt pattern you were looking for and is designed specifically to fit 3500lb axles.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Video: Kodiak Trailer Brakes K250CP Review
- Video: Kodiak Trailer Brakes KDBC250E Review
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Rotor - K08-435-05
- Search Results: hydraulic brake hose
- Shop: Ladder Rack
- Shop: Suspension Enhancement
- Search Results: kod59fr
- Video: Kodiak Trailer Brakes 15SI-BLKIT Review
- Q&A: Difference Between Kodiak Hub/Rotor Kit and Just Rotor Kit
- Q&A: Replacement Zerk Fitting Recommendation for Dexter EZ Lube Spindle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Replacement Rotor Hub Needed for a 2004 Four Winns Trailer
- Q&A: Will a Kodiak 250 Disc Brake Caliper Fit in Place of a Kodiak 225 Caliper
- Article: How to Bleed Your Trailer Surge Brakes
- Video: Kodiak Disc Brake Kit Installation K2R35D
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator with Lockout - DX89FR
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: hydraulic disc brake actuator
- Search Results: akhd~545~2~2k
- Search Results: dx33fr
- Search Results: timbren