Determining If Reese Electric Landing Gear RP500708 Will Fit A 2011 Keystone Avalanche 330RE
Question:
Will this work in my 2011 Keystone Avalanche 5th wheel 39, model RE330 And is it a better or worse configuration as compared to the factory single electric motor. Thanks
asked by: John O
Expert Reply:
The Reese Electric 5th Wheel Landing Gear # RP500708 you were looking at may fit your 2011 Keystone Avalanche 5th Wheel Model 330RE, but the only way to be sure is measure the distance between the weld stops of your current landing gear.
The weld stops of the # RP500708 measure 15-1/2" apart inside to inside, and 17-1/2" apart outside to outside as you can see in the included diagram. As long as this matches your current landing gear this would be the correct replacement for you.
Having two separate motors will be beneficial over a single motor setup like you currently have due to it allowing you to adjust each side indivudally which will allow you to make sure the trailer is level even on uneven ground.
I included a video of the # RP500708 for you to take a look at.
(click to enlarge)
