Correct Replacement Idler Hubs for Champion Boat Trailer
Question:
I have 1993 Champion Boat trailer I need new hubs for. Spindle dimensions are Seal Seat - 1.620, Inner Bearing seat 1.375, Outer bearing seat 1.060. 15 inch wheels 5 on 4 1/2. Current hub has L68149 inner, L44649 outer bearings and 168233 grease seal. AKIHUB-545-35-G-K looks like the correct hub except the grease seal that comes with is Inner diameter: 1.719, which seems a little big for a spindle with 1.620 Inner Bearing seat. My spindles are a little rough so I would like bearing to replace the standard seals with buddy seals with stainless steel rings and also need new pair of Bearing buddy caps for new hub. Can you assist please?
asked by: Darrin
Expert Reply:
The L68149 and L44649 bearing combo is very common and mostly used on 3,500 lb axles. These will then use a standard 1.719" I.D. x 2.565" O.D. grease seal. There are no bearings or seals with the exact dimensions you listed so the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-K is likely what you need as all the dimensions are very close. The correct Bearing Buddy Bearing Protectors would then be part # BB1980A-SS.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Can Drums from a Trailer with 10 Inch Hydraulic Brakes be Re-Used When Converting to Electric Brakes
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Vehicle Tow Bar Brake System
- Search Results: break away cable
- Search Results: a60
- Search Results: brake
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: surge brake
- Shop: Dexter Zinc-Plated, Leverlock Coupler - 2" Ball - 3" Channel - Bolt On - 5,000 lbs
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Shop: Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Do Trailer Wheel Bearings Need Repacking if Bearing Buddy Bearing Protectors Are Used
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: How to Convert Oil Bath Hubs to Grease Hubs on Trailer