How To Determine Which Bearings, Races, and Grease Seal Fit EZ Lube Axle W/ 10" AL-KO Brakes
Question:
Hello- I am needing help identifying the correct bearing kit inner, outer, races, seals for my 10in ALKO trailer breaks with EZ lube.
asked by: Bill M
Expert Reply:
I would be happy to walk you through how to determine which inner and outer bearings, races, and grease seals fit your EZ Lube axle with 10" AL-KO brakes, but we do not have a way to determine this information with just the brake size.
Instead you will need remove one of your hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If your bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.
Moving on to the grease seal you will need to use the digital calipers to measure the spindle where the grease seal rides, and the inside of the hub where the grease seal gets installed.
If you can provide this information I would be happy to recommend the correct replacement parts for you.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Trailer Brake Controller Options for a 2023 Chevy Traverse with Tow Package
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Bearings and Seals for Curt 5.2K to 8K Axle
- Q&A: How to Wire Solera Smart Arm 12V Power RV Awning
- Article: How to Measure a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)