Are Replacement Round Bars Available for Reese Weight Distribution Hitch 49913

Question

Question:

Im trying to locate or if possible to replace my bars that grew legs unfortunately for me. I can weight to 10000lb part number 49913

asked by: James

0

Expert Reply:

I may have a solution for you to get back on the road, but I reached out to my contact at Reese and unfortunately they currently do not have a service kit that would allow you to replace lost bars from a Reese # RE44FR system (44913). The # RE44FR is a newly designed system and the connection between the head and bars is new and not compatible with any of the old bars.

Currently your only available solution would be to replace your springs bars by getting a new # RE44FR altogether; you'd at least have an extra head and some spare parts for the system if anything were to go wrong in the future.

expert reply by: Erik B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to…

view full answer...

Answer 4

While I have no way to see exactly what leveling system you have on your 2006 Tiffin Phaeton 35DH, I was able to find information on a forum showing someone who did confirm the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/…

view full answer...

Answer 5

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Answer 6

Hello, Phil. Yes, the bolts that go into the adapters at the end of the arms should be torqued. It looks like those are 5/16" grade 5 bolts so they should be torqued to 18 ft lbs. I have included the torque chart below for your reference.

view full answer...

Answer 7

Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TL52SR will work perfect for your coach. These steps…

view full answer...

Are Replacement Round Bars Available for Reese Weight Distribution Hitch 49913

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching