Determining Bolt Pattern of 16 inch Trailer Wheel for Replacement
Question:
The center to center of lugs dimension is: 2-3/4 The center of hub hole dimesnsion is: 3-5/8 Wheel has 6 lugs. If you do not carry it? Where you recommend for me to look for a used one? I will go to tire shop for a used one. Thank you,
asked by: Billy L
Expert Reply:
For 6 lug wheels we need the dimension across the center of the wheel from stud to stud to determine bolt pattern. You most likely have the very common 6 lug pattern of 6 on 5-1/2 inch but you'd need to measure first to verify.
The white wheel part # AM20741 that you referenced has this bolt pattern and should work well for you but it's probably worth verifying first.
Product Page this Question was Asked From
Dexstar Steel Spoke Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 16 Inch
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Q&A: Replacement Breakaway Cable Repair Kit for Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Q&A: How to Identify What Wheel Bearings and Grease Seals are Needed on Trailer Axles
- Q&A: How to Measure to Determine the Correct Grease Seal for a Trailer Spindle
- Q&A: Axle Capacity with Bearings 28580 and 25580 with Seal SKF23839
- Article: Trailer Tire Sizing
- Q&A: How to Convert Oil Bath Hub to Grease - 10k Dexter Axles on BigTex 22GN
- Q&A: Nev-R-Adjust Trailer Brakes are Not Locking Up After Re-packing Bearings
- Article: Trailer Maintenance Schedule
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: Testing Breakaway Systems
- Article: How to Charge a Dump Trailer Battery
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box