Adding A Propane Line From The RV Tank To An Appliance

Question:

I need to add a high pressure quick disconnect to my RV propane system, to run a portable Honda Generator. I have a 3 way brass splitter that I will place in line between the tank supply line and the in side of the 2 stage regulator. I need part #s for: 1 High pressure hose ~6 feet from the splitter to a Male quick disconnect 2 Female high pressure quick disconnect 3 Male high pressure quick disconnect 8 6-8foot high pressure line, one end for Male high pressure quick disconnect, other to connect with the ACME TYPE 1 Male 4 ACME TYPE 1 Male. This will screw into the current Female on the generator regulator standard black plastic BBQ type 5.6.7 adapters if needed THANK YOU!!!!

asked by: Andre D

Expert Reply:

For the splitter I recommend using the MB Sturgis Sturgi-Stay T-Fitting for POL Valve - 2 Model 250 Quick Disconnect Ports Item # 103537-MBS. From there you can use the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 10' Item # 100476-120-MBS with the MB Sturgis Disposable Propane Bottle Adapter Fitting Item # 204132-MBS on the 1 Inch-20 - Male fitting.

If you need an extension you can use the Camco Replacement Propane Extension Hose - Male and Female Throwaway Cylinders - 5' Long Item # CAM59045 or MB Sturgis Propane Adapter Hose for Small Appliance - Disposable Cylinder Ports - 12' Item # 100284-144-MBS between the quick disconnect hose and the bottle adapter fitting.

With the tee recommended above you'll be able to easily attach other quick disconnect hoses to run propane to other appliances as well.