Fuse Location In The Furrion RV Backup Camera

Question:

Per instructions while I installed the two furrion side cams, it’s says “Ensure that the fuse on the connected power line provides additional 1A fusing current for the camera.” How and where should I install this 1A fuse and what does it look like. One for every power line to each camera or one anywhere for the three. Help

asked by: Omar F

Helpful Expert Reply:

The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen Item # FOS05TASF only has a 2 amp 125v slow blow fuse in the power cable. If you take apart the portion of the cord that goes into the 12v outlet you'll see the fuse is the portion that moves back and forth and makes contact in the 12v outlet.

expert reply by: Kevin C